Test Meter for Salt, pH and Temperature (Model 1766-Kit) by LaMotte

Complete with Carrying case and calibration solution.

Use a TRACER PockeTesterTM... The most reliable we have found - High Performance Tester!

Check your salt regularly. It will protect your investment in your salt chlorinator.  Keeping salt levels at proper levels will add lots of life to your Salt Cell Electrode. Why buy expensive strips when you can have unlimited test for years to come with this meter? Get yours today!

• Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
• Units of measure: pH, µS, mS, ppm, ppt, mg/L, °C, °F
• Memory stores up to 25 labeled readings
• Adjustable Conductivity to TDS ratio
• Auto power off and low battery indicator
• Includes buffer tablets: 7.0; 4.0; 10.0
• Use separate pH and conductivity meters if sample conductivity is less than 200 uS. False high conductivity readings may result using a combined pH/Conductivity/TDS Tracer below 200 uS. Refer to other electronic instruments for separate pH and conductivity/TDS meters.

Salt/TDS/pH/Temperature TRACER PockeTester was designed for the pool professional. The teste's probe is dipped into a sample of pool water and the results are ready instantly. The Salt PockeTester measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0 to 149?°F.

Don't forget to buy some calibration solution to keep your meter in the best of condition!